RXL24WMVJU9 + FDMQ24WVJU9
Daikin 24,000 BTU 2 Ton
Single-Zone Slim Duct
Cold Climate
Ductless Heat Pump
The RXL24WMVJU9 is a Daikin cold-climate single-zone slim-duct ductless heat pump paired with the matching FDMQ concealed indoor unit. It’s the biggest “single-zone hidden ductless” option in this lineup — high capacity, inverter-driven modulation, and discreet grille delivery.
This 24 class is for truly large single zones: big open basements, large open concept main floors, or a wide area where you want multiple supply points within one zone (while still keeping duct runs short and sensible). Applied correctly, it’s a clean-looking way to move real air and keep comfort stable.
Because it’s powerful, application discipline matters. If the zone doesn’t actually need 2 tons, you can lose comfort stability. We validate the load on-site, confirm the duct layout can support the airflow, and commission static pressure/airflow properly so it performs the way a 2-ton slim-duct should.
We confirm sizing and pricing on site – no pressure, no upsells.
Installed in Ottawa and surrounding areas by Peak Comfort HVAC
Specs for the RXL24WMVJU9 + FDMQ24WVJU9
- - System type: Single-zone slim-duct ductless heat pump (Cold Climate)
- - Nominal capacity (rated cooling): 21,200 BTU/h (2.0 ton class)
- - Matched indoor unit: FDMQ24WVJU9
- - Matched outdoor unit: RXL24WMVJU9
- - Efficiency (published): 15.2 SEER2 / 9.6 EER2 / 8.4 HSPF2
- - Sound pressure level (published): Indoor 40 dB(A) / Outdoor 55 dB(A)
- - Refrigerant: R-410A
- - Indoor dimensions (H×W×D): 9-5/8" × 39-3/8" × 31-1/2"
- - Outdoor dimensions (H×W×D): 28-15/16" × 34-1/4" × 12-5/8"
- - Weight: Indoor 82 lb / Outdoor 132 lb
- - AHRI reference #: TBD
Technical documents
Key features of Daikin Regular Single-Zone Slim Duct (RXL + FDMQ)
- - Cold-climate single-zone platform: chosen when you want stronger winter performance than “regular” ductless categories.
- - Concealed slim-duct indoor unit: hidden in a ceiling/soffit; comfort delivered through grilles for a clean look.
- - Inverter-driven modulation: steadier temps, less cycling, better comfort than basic on/off systems.
- - Best with short, simple duct runs: slim-duct shines when ducts are kept short and properly sized, with a correct return strategy.
- - Static pressure setup matters: airflow/stage performance depends on commissioning; restrictive ducts can hurt output and increase noise.
- - External static pressure is adjustable in stages (by remote controller): allows setup to match the real duct layout.
- - Air filter note: filter is not listed as a standard accessory — typically added on the return/suction side within the duct system.
- - Peak Comfort install standard: correct sizing, clean line routing, proper drain planning, pressure test + evacuation, and startup checks with real measurements — no guesswork.
- - No upsell / no scare tactics: we confirm layout, placement, and sizing on-site, then give clear options and pricing.
Want to see if this ductless is the right fit?
Book a no-pressure ductless estimate. We’ll confirm layout, placement, and sizing - then give you clear options and pricing.
Get in Touch
Office Address:
275 Montfort St, Ottawa
ON K1L 5N8
Servicing: Ottawa, Orleans, Nepean, And the surrounding areas
Phone:
E-Mail:
info@peakcomfort.ca
Quick Contact
Email: info@peakcomfort.ca
© Peak Comfort HVAC Inc. All Rights Reserved.