RX09WMVJU9 + FFQ09W2VJU9

Daikin 9,000 BTU 0.75 Ton
Single-Zone Ceiling Cassette
Ductless Heat Pump

The RX09WMVJU9 is a Daikin regular (standard) single-zone ceiling cassette ductless heat pump paired with the matching FFQ recessed indoor unit. It’s built for smooth, steady comfort using inverter-driven output — meaning it ramps up and down instead of cycling hard on/off like a basic single-stage system.

 

This 9,000 BTU (3/4-ton) size is best when you want quiet, even comfort in a smaller “single zone” — like a bedroom, office, small basement room, or a tight living area. Ceiling cassettes shine in spaces where you don’t want a wall unit taking up wall space (or where furniture layout makes wall placement awkward).

 

A quick reality check: ceiling cassettes are more about layout + airflow than “square footage rules.” We confirm that the cassette location can actually throw air where it needs to go, and we pay extra attention to drain routing, line-set path, and access for future service — because a great cassette on paper can be a headache if it’s installed in the wrong spot.

We confirm sizing and pricing on site – no pressure, no upsells.

Installed in Ottawa and surrounding areas by Peak Comfort HVAC

Specs for the RX09WMVJU9 + FFQ09W2VJU9

  • System type: Single-zone ceiling cassette ductless heat pump (Regular / Standard efficiency)
  • Nominal capacity: 9,000 BTU class — AHRI rated 9,100 BTU/h cooling / 10,000 BTU/h heating
  • Matched indoor unit: FFQ09W2VJU9
  • Matched outdoor unit: RX09WMVJU9
  • Efficiency (AHRI): 19.80 SEER2 / 12.00 EER2 / 9.40 HSPF2
  • Lowest sound level (Quiet/Low): Indoor 29 dB(A) (H/M/L = 38/35/29) / Outdoor 46 dB(A) cooling (50 dB(A) heating)
  • Refrigerant: R-410A
  • Indoor dimensions (H×W×D): 10-1/4" × 22-5/8" × 22-5/8"
  • Outdoor dimensions (H×W×D): 21-5/8" × 26-9/16" × 11-3/16"
  • Weight: Indoor 36 lb / Outdoor 63 lb
  • AHRI reference #: TBD

Technical documents

Key features of Daikin Regular Single-Zone Ceiling Cassette (FFQ + RX)
  • Recessed ceiling cassette design: frees up wall space and keeps the install visually clean.
  • Inverter-driven comfort: modulates output for steadier temperatures and less on/off cycling.
  • Even air distribution: ceiling placement can reduce “hot/cold corners” when located properly.
  • Good option for awkward wall layouts: helps when wall-mount placement would clash with windows, furniture, or sightlines.
  • Serviceability matters: we plan access, drain routing, line-set path, and clean electrical/condenser work so performance matches the brochure.
  • No upsell approach: we confirm sizing and layout on site and give clear options — no pressure, no scare tactics.

Want to see if this ductless is the right fit?

Book a no-pressure ductless estimate. We’ll confirm layout, placement, and sizing - then give you clear options and pricing.

Get in Touch

Office Address:
275 Montfort St, Ottawa
ON K1L 5N8

Servicing: Ottawa, Orleans, Nepean, And the surrounding areas

Phone:

E-Mail:
info@peakcomfort.ca


 © Peak Comfort HVAC Inc. All Rights Reserved.